HomeActive EquipmentDynamode NC-100TX-DL
Dynamode NC-100TX-DL
Dynamode NC-100TX-DL Dynamode NC-100TX-DL Dynamode NC-100TX-DL

Dynamode NC-100TX-DL

100/10M PCI adapter, 33 MHz, 32-bit, 5 V, 115 x 38 mm

NC100TX-DL

Out of Stock

Save up to 2% online

Require Project Pricing?

Click here to email your parts list and we will send you a quote

32-bit 100/10M PCI adapter. This is a 32-bit adapter for using in personal computers with a Peripheral Component interconnect (PCI) computer bus to eliminate I/O bottlenecks and to reduce CPU loading using bus master architecture.

This is also a Full-Duplex adapter connected to an Ethernet network with a single connection over unshieded twisted pair (UTP) cable and can auto-sense either 10 Mbps or 100 Mbps by full auto-detection.



- Single-chip controller complies to PCI local bus specification revision 2.1

- Conforms with IEEE 802.3 10BASE-T and IEEE 802.3u 100BASE-TX standards

- High performance bus master architecture for low CPU and bus utilization

- Single shielded RJ-45 connector for using at either 10 or 100Mbps speed

- Single +5 V power supply operation

- On-board socket for an optional remote boot ROM

- Provides I diagnostic LED to monitor linking status

- Provides high performance network drivers such as ODI, NDIS, NDIS3

- NDIS4, NDIS5, UNIX, etc
CertificationFCC Class A
Connectivity technologyWired
Depth38 mm
Ethernet LANY
Ethernet LAN (RJ-45) ports1
Host interfacePCI
Operating temperature (T-T)0 - 55 °C
Width115 mm

NC100TX-DL.pdf

Dynamode NC-100TX-DL Data Sheet

Download (957.63k)